96-97’ Squier Musicmaster from the Vista series on the left, and (oops I forget exactly) mid-late 70’s Fender Musicmaster on the right. So so so very different in almost every way. I love you Squier, but I’ll take the Fender this time, hands down. #tymguitars #guitartech #awfulshorttermmemory #squier #fender #musicmaster #bass #guitar #repairshop #fortitudevalley #brisbane #beexcellenttoeachother (at Tym Guitars)

Well, there was always going to be something I overlooked here…can’t believe y'all didn’t stop me 😉Basically, a pretty huge oversight was that I failed to take into consideration the fretboard radius (7.25) vs the bridge radius (12!!!) hahahaha… So, I had two options, remove some frets and sand in a compound radius, as it wasn’t too big a deal between 1st and 12th, which would be the responsible thing to do. OR - do the thing that I don’t recommend you out there ever do, and sand that compound radius right onto the frets. Why don’t I recommend it? Well, it’s fine if it’s your guitar, like this is mine, and thankfully these brand new frets were tall enough to take it, but it’s just, it’s pretty lazy, and not something a customer should ever expect. You also run a huge risk of taking off so much fret, that the whole thing becomes a bigger mess than it already was, so - don’t do it. In this instance though, I got lucky and it all worked out, and feels pretty darn okay. I got, very lucky. 🍀#custommistakes #crisisaverted #telecaster #shortscale #guitar #guitartech #ineedanadult #repair #rectify #cursedobjects #brisbane #beexcellenttoeachother

I’m a little bit overdue to build something stupid, so…roughing out a plan to rectify that situation asap. I’ve got a MIJ Jaguar neck that I recently did a refret on, a pre routed standard Tele body (thankfully no string through was drilled), a pocket full of idiot ideas, and ain’t nothin’ gonna stop this from happening, not even the very obvious issues here. Nah, it’ll be fine. The wrap around bridge will allow me to get the 24inch scale that’s required, and to deal with the break angle, I’m going to build a solid shim for the neck pocket - guessing about 2mm, we’ll see. I’ll move the bridge pickup towards the neck by a few millimetres so it’s not right on the bridge, then do a massive smugglers route under the pickguard (of which I’ll cut a custom one, using this as a very basic template). Then decide on switching/control options, and a coat of the finest paint that $6.50 can buy. Should be fun!!! P.S please feel free to point out anything huge I might have missed here! #mashup #customguitar #justforfun #guitar #failureisalwaysanoption #telecaster #jaguar #shouldntbeleftalone #beexcellenttoeachother

Here’s a particularly nice MIJ Mustang bass, that’s just had a setup and service, here @tymguitars It’s already spoken for, but I’ve had a good time with it while it’s been to stay. The very unique sound of these may not be to everyone’s taste, they can be a little “plunky”, but with the right setup and string gauges, they go pretty darn well! While there was a fair amount of work to do, everything in/on this bass did what it was meant to, to allow for a good setup. It may come as a surprise, but this is certainly not always the case…if you get an instrument back from me and I say “oh yeah, that’s a good one”, it probably means I didn’t have to move mountains to get it playing well. Stay rad out there, and as always, be excellent to each other. #tymguitars #guitartech #fender #bass #mustang #madeinjapan #guitar #repairshop #winnlane #fortitudevalley #brisbane #beexcellenttoeachother (at Tym Guitars)

Sparkle surprise. #tymguitars #offsetguitars #fender #supersonic #guitar #beexcellenttoeachother (at Tym Guitars)

Orange is young, full of daring… Oh boy, working on this Fender Super-sonic, has been a mixed bag for me. I’ve wanted one of these (well the Squier model) since they first appeared in the mid/late 90’s and, well, this is the first time I’ve been able to try one, and damnit it’s a bit of an awkward little thing. PERSONAL OPINION AHEAD - I’m not totally bagging out the guitar, it does sound great, and has plenty going for it, but for me, there’s just so much going on here that makes it more of a pain to play, than anything else. The balance of the guitar is completely shot. It hangs from the strap as though it WANTS to fall towards the floor face down, which is probably my biggest issue here. It also makes it very difficult to chord, or really index where you are on the neck because it just feels wrong hanging like that. On top of that, given the upside downsies body, with the toggle, on I guess the upper horn, you have only a tiny amount of strumming space between it, and the bridge, so it feels really hard to dig into chords with any gusto. I just felt really cramped up. Maybe it’s just me? These are still one of my fave daft guitars, and with some simple mods, a lot of the problems could be ironed out, but I don’t think I’ll be rushing out to grab one. That finish though, hells yeah! #fender #supersonic #guitartech #guitars #guitarepair #tymguitars #guitar #repairshop #fortitudevalley #brisbane #winnlane #personalopinionsorryguys #beexcellenttoeachother

A 1970’s Guild T50 just came into the shop on consignment, the original bridge comes with it too! I just gave it a once over, and some new strings, and it’s good to go. Super tidy condition, so clean in fact that I had to check the date again…and again! #tymguitars #guild #guitar #guitartech #vintageguitar #vintage #guitars #guitarshop #repairshop #fortitudevalley #brisbane #beexcellenttoeachother (at Tym Guitars)

Lil’ bit of afternoon maintenance that I’ve been meaning to get onto for a while, for a truly amazing guitar. #fender #stratocaster #strat #vintage #guitar #guitartech #guitars #brisbane #beexcellenttoeachother

Toys! I mean, tools. It’s been a little while since my last refret and I forgot I didn’t have a flat back base for my hand press (for when you reach the tail end of a neck). Thankfully I remembered we have this bad ass press hanging out the back of the shop. Done, not yet dusted. #tymguitars #guitarepair #guitartech #fretpress #fender #jaguar #mij #repairshop #guitar #toolsofthetrade #winnlane #fortitudevalley #brisbane #beexcellenttoeachother (at Tym Guitars)

Just finished this up, and I can still see the exact line in the beard where I realised just how much effort this bloody well was. Band deets from this poster are under wraps until @tymguitars drops the final version, but I ran outta time to do a custom typeface so…just imagine a real nice font placed in a way that probably goes against design rules. Been fun doing this, so I’ll hopefully find time to get into the swing of it again, drawing that is, and find my style while I’m at it. I know this is fairly rudimentary, and it’s not half as detailed as I’d like, but, gotta restart somewhere 👍#theresabadmoonontherise #drawing #wacom #ihavenoideawhatimdoing #learning #failureisalwaysanoption #sketch #adobe #illustrator #photoshop #brisbane #bandposter #gigposter #beexcellenttoeachother